Description

It is a highly powerful drain cleaner (extra strong) that liquefies grease, mud, paper, etc.
It is a chemical composition based on softened, disintegrating and descaling acids.

It is particularly recommended for cleaning and unclogging small drains, floor drains, grease collectors, septic tanks, sewage treatment plants, dishwashers and sanitary ware.
It is based on concentrated sulfuric acid. therefore, it is a very corrosive product, which can cause severe burns. Do not add water to the original container as this could cause violent eruptions. It should always be used with good ventilation. KEEP OUT OF THE REACH OF CHILDREN. In case of contact with eyes, rinse immediately with plenty of water and consult a specialist immediately. In case of ingestion, do not induce vomiting. Drink large amounts of milk and water or egg whites beaten with water. Immediately call the doctor. In case of skin contact, immediately wash the affected area with water for 15 minutes.

For correct use, the following recommendations must be followed, as well as the precautions listed above. Remove all stagnant water and only then apply the product, leaving it to act for 5 to 15 minutes, then flushing it several times with cold water. Never use hot water.
It is recommended to avoid contact with aluminum and stainless steel.
Dilutions:
Small drains: Apply 2.5 dl. leave to act for 5 minutes, flushing with cold water for 2 to 3 minutes.
Floor drains: Apply 1 liter. Leave to act for 15 minutes, flushing with cold water for 5 minutes.
Grease collectors: Apply 1 liter or more. For control, periodically apply 20 to 50% of the initial dose.
Septic tanks: Apply 4 liters for every 2000 liters of capacity. Pour into the drain. Sewage treatment plants: Apply 5 liters for every 1250 liters of capacity. Apply with a hose to the bottom of the reservoir.
Dishwasher and Sanitaryware: Apply 1 liter. Leave to act for 15 minutes, flushing with cold water for 5 minutes.